Crane is a kind of special equipment used for lifting operations. Its work intensity is high. It must be operated in accordance with regulations during use. Overloading operations are not allowed or illegal operations are not allowed. The safe use of the crane should be based on safety as the criterion, the use of the unit must regularly carry out a comprehensive inspection of the crane, and record the status of the crane, according to the situation for maintenance and maintenance.

Crane is a kind of special equipment used for lifting operations. Its work intensity is high. It must be operated in accordance with regulations during use. Overloading operations are not allowed or illegal operations are not allowed. The safe use of the crane should be based on safety as the criterion, the use of the unit must regularly carry out a comprehensive inspection of the crane, and record the status of the crane, according to the situation for maintenance and maintenance. The following small series to introduce how to extend the life of the crane:

The 1. should check and adjust all parts related to the engine in time to keep the crane engine running in good condition.

2. oil, water, gas and the body to keep clean. If the fuel is not pure, oil leakage, dripping, and even blockage of the oil circuit will occur; the purity of air and water is not high, it will affect the heat dissipation capacity of the engine and wear the body; if the surface of the body is not cleaned, it will corrode the body. Bring unnecessary losses.

3. ensure that there is an adequate supply of oil, water and air. If these energy supply is insufficient, it will cause the crane to be difficult to start, poor lubrication, power drop, serious wear, can not operate normally, and shorten the service life.

4. the parts of the crane prone to problems, do a good job of daily safety inspection. Crane due to the use of lifting equipment in the process will be subjected to different strength of the shock, fastening parts of the bolts, nuts will be loose, so often check, prevent damage to the body due to loose failure.

5. master the correct use of the engine. Before use, during use, and after use, the correct operation method should be used. Careful observation and frequent inspection should be used to find and solve problems in time and keep the engine running normally.

The 6. engine must be run in strictly in accordance with the regulations before use. This is not only a prerequisite for use, but also a basis for extending its service life.